HobbyKing
INSTA-CURE IC-GEL .7 OZ
,
Insta-Cure IC-Gel .7 oz IC-GEL is a cyanoacrylate paste that ...5 Reviews
HobbyKing
BMS-616MGPLUSHS SUPER STRONG SERVO (MOS-FET) FOR BUGGY 10.2KG / .12SEC / 46.5G
| Weight | 46.5 grams / 1.66 oz. |
| Dimensions | 40.5 x 20 x 38.5 mm / 1.60 x 0.78 x 1.54 inch |
| Torque At 6.0V | 10.2kg-cm , 128 oz-in |
| Speed At 6.0V | 0.12 sec / 60° at no load |
**Please take note: We have found some units to have the incorrect sticker. Showing BMS-616MG+HG, instead of BMS-616MG+HS.,
BMS-616MG+HS Super Strong Servo (Mos-FET) for buggy 10.2kg / .12sec ...5 Reviews
HobbyKing
HOBBYKING 30A BLUESERIES BRUSHLESS SPEED CONTROLLER
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 30A |
| Burst Current | 40A |
| SBEC | 5V/ 3A Output |
| Size | 23*43*6mm |
| Weight | 28g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-4 Cell Lipo / 5-12 Cell Ni-XX,
Its no “Mystery” where these ESCs are made, now they ...5 Reviews
HobbyKing
TURNIGY 540L V-SPEC INRUNNER W/ IMPELLER 1025KV
| Diameter of shaft | 5mm |
| Length of front shaft | 14mm |
| Battery | 3-4 Cell 4S/14.8V |
| RPM | 1350kv |
| Max current | 40A |
| No load current | 2.4A |
| Internal resistance | 58.3ohm |
| Prop | APC9x4.5, APC10x4.7 |
| Max Current | 18.9A, 30.5A |
| Pull | 920g, 1360g |
| Prop | APC8x3.8, APC9x4.5 |
| Max Current | 24.5A, 28.5A |
| Pull | 1230g, 1580g |
| ESC | 60A |
| Battery Type | 3-4S Only |
Dimension:, 58mm x 36mm, 72mm(with shaft), Weight:, 173g (kv1025) (not including connectors), Lamination thickness: ., Data:, 3S 11.1V,
High torque inrunner, excellent for running propellers without needing a ...5 Reviews
HobbyKing
BMS-620 HIGH TORQUE SERVO 9.1KG / .15SEC / 45G
| Weight | 45grams / 1.58oz. |
| Dimensions | 40.5 x 20 x 42 mm / 1.60 x 0.78 x 1.62 inch |
| Torque At 4.8V | 9.1kg-cm , 126 oz-in |
| Torque At 6.0V | 10.6kg-cm , 144 oz-in |
| Speed At 4.8V | 0.15sec / 60 deg at no load |
| Speed At 6.0V | 0.13sec / 60 deg at no load |
5 Reviews
HobbyKing
ALLOY E-PROP SPINNERS AC377 4MM TO 6.35MM
,
Alloy E-Prop Spinners. When selecting a size, note that the ...5 Reviews
HobbyKing
BMS-L560DMG+HS 1/4 SCALE DIGITAL SERVO (MG) 22.3KG / .16SEC / 140.5G
| Weight | 140.5g / 4.96 oz |
| Size | 59.6 x 29.9 x 55.48 mm / 2.35 x 1.18 x 2.18 in |
| Torque At 4.8V | 22.3kg/cm , 289 oz/in |
| Torque At 6.0V | 27.5kg/cm , 380 oz/in |
| Speed At 4.8V | 0.16 sec / 60° at no load |
| Speed At 6.0V | 0.13 sec / 60° at no load |
5 Reviews
HobbyKing
HOBBY KING 2.4GHZ 6CH TX & RX V2 (MODE 2)
Note:, Only HK-T6A receiver is comptible with HK-T6A transmitter.,
HobbyKing 2.4Ghz 6Ch Tx & Rx V2 (Mode 2)(THROTTLE ON ...5 Reviews
HobbyKing
3D SPINNER FOR DLE30 (33X33X26MM) BLUE
| Shaft size | 10mm |
| Bolt hole | 4.3mm |
HobbyKing
X8 R6 6CH 2.4GHZ RECEIVER (SHORT ANTENNA)
Size:, 50 X 26 X 10mm (1.97 X 1.02 X 0.39 inch), Weight:8g,
2.4GHz receiver for Assan X8 systems. Compatible with all X8 ...5 Reviews
HobbyKing
POWER SYSTEM W/ GEARBOX EPS-C20
| Dimension | 23mm x 24mm |
| Weight | F25g + gearbox |
| Diameter of shaft | 2.3mm(EPS) |
| Length of front shaft | F8mm |
:10g(no spinner), :64T, :11T-16T, KV:2050rpm/v,
Gearbox; 20mm diameter motors can be fixed Weight Big Gear ...5 Reviews
HobbyKing
GLASS FIBER CLOTH 450X1000MM 48G/M2 (ULTRA THIN)
| Weight | 48g/m2 |
5 Reviews
HobbyKing
PROP ADAPTER W/ ALU CONE M6X4MM SHAFT (GRUB SCREW TYPE)
,
Propeller adapter. To suit; 4mm Motor Shaft. 6mm Propeller Shaft. ...5 Reviews
HobbyKing
C2226 MICRO BRUSHLESS OUTRUNNER 1800KV (21G)
| Diameter | 22.2mm |
| Length | 28mm |
| Shaft | 5mm |
| Weight | 21g (with 10cm wire) |
| Power | 70W |
| Resistance | 657 |
| Idle Current | .5A |
| Max amp | 10A (15sec burst) |
| Voltage | 2-4cell Lipoly |
Kv: 1800rpm/v, Turns: 25,
Specifications. We do not have a suggested prop size for ...5 Reviews
HobbyKing
TURNIGY BRUSHLESS ESC 85A W/ 5A SBEC
| Brake | off |
| Low voltage cutoff threshold | Medium (3.0V/65%) |
| Timing setup | Automatic |
| Soft Acceleration Start Up | Medium |
| Governor mode | OFF |
| Frequency | 8kHz |
| Low voltage cutoff type | Reduce power |
| Cont. Current | 85A |
| Burst Current | 100A |
| SBEC | 5.5V/ 5A Output |
| Size | 52*34*20mm |
| Weight | 89g |
Features:, Extremely low internal resistance, Programming features:, Brake setting (we recommend using brake for only folding props applications), Factory default settings:, Battery type Detect:, LiPo with Automatic Cell, Battery:, 2-6 Cell Lipo / 5-18 Cell Ni-XX,
Built with imported N-Channel mosFET's and an ultra fast Atmel ...5 Reviews